This ISA webinar on industrial calibration was presented by Hunter Vegas, ISA author and an engineering manager and lead project engineer with Avid Solutions, Inc., and Ned Espy and Roy Tomalino of Beamex.

 

 

Field process calibration isn’t just about getting the job done, it’s about getting the job done right. It’s cliché, but true. Instrument calibration requires the proper process, tools and parameters for each instrument application to ensure valid results. If one of the three are lacking, your results could have little validity. In this recorded ISA webinar, experts expose the most easy-to-make mistakes and how to avoid them, so you can be confident in your calibration results.

 

 

About the Presenters

Hunter Vegas2Hunter Vegas, P.E., holds a B.S.E.E. degree from Tulane University and an M.B.A. from Wake Forest University. His job titles have included instrument engineer, production engineer, instrumentation group leader, principal automation engineer, and unit production manager. In 2001, he joined Avid Solutions, Inc., as an engineering manager and lead project engineer, where he works today. Hunter has executed nearly 2,000 instrumentation and control projects over his career, with budgets ranging from a few thousand to millions of dollars. He is proficient in field instrumentation sizing and selection, safety interlock design, electrical design, advanced control strategy, and numerous control system hardware and software platforms.

Connect with Hunter:
48x48-linkedin

 

OLYMPUS DIGITAL CAMERANed Espy has been promoting calibration management with Beamex for more than 20 years. He has directed field experience in instrumentation measurement application for over 27 years. Today, Ned provides technical & application support to Beamex clients and partners throughout North America.

 

 

Connect with Ned:
LinkedIn

 

Roy TomalinoRoy Tomalino has been teaching calibration management for 14 years. Throughout his career, he has taught on four different continents to people from over 40 countries. His previous roles include technical marketing engineer and worldwide trainer for Hewlett-Packard and application engineer with Honeywell. Today, Roy is responsible for all Beamex training activities in North America.

 

Connect with Roy:
48x48-linkedinEmail

 

Print Friendly, PDF & Email

Warning: file_get_contents(https://automation.isa.org/wp-content/uploads/2018/04/ISA-logo-scrolling-animated-87percent-20180427-1.svg): failed to open stream: Connection refused in /home/content/p3pnexwpnas04_data02/49/2991149/html/wp-content/plugins/logo-svg/logo-svg.php on line 268

Pin It on Pinterest

Shares